Club T-Shirts
Re: Club T-Shirts
So, there's good and bad news on the T-shirt front. The good news is Lisa and I have made a few changes for the better to the design (we think). The not so good news is that I under estimated the cost. I've gotten 3 different estimates so far and all of them were over what I posted previously. This is due primarily to the small quantity of shirts (15) to spread set up costs, etc. across. It's also a result of wanting to use a quality process and shirt. That by no means means the most expensive. I'm meeting with one more supplier next week. The bottom line is, I'm looking at $450-$600 out of pocket to print 15 shirts ($30-$40 each) that I could potentially end up eating. I'll update everyone after my meeting next week. If I decide to go forward I'll need firm commitments from those interested. Thanks for your patience.
- Attachments
-
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Re: Club T-Shirts
I'm still in for a Medium, Randy. For the greater good.
Robin
'72 240Z original L24 and SU's, 5-speed, 4.11 gears
'72 240Z original L24 and SU's, 5-speed, 4.11 gears
Re: Club T-Shirts
OK, I found a new supplier who will do the shirts more reasonably. They will cost $25 each, but I'll have to purchase 25 shirts. I will likely move ahead this week and keep my fingers crossed that I will be able to eventually sell most of what I buy. I'll post here when they come in and bring them to the Pavilions when done for those who have expressed interest.
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Re: Club T-Shirts
Much more reasonable pricing! What does it matter if it is missing the left arm .. 
Duffman
1970 240Z, #1399
1970 240Z, #1399
Re: Club T-Shirts
Make sure Steve's has an XXXL neck hole.
58 P220, 63 PL312, 64 NL320, 65 SPL311, 66 411 2-door, 67 WRL411 stroker, 68 510 SR20, 72 S30 RB25, 77 620 SR20, 79 B310, 90 S13 coupe, 92 Silvia, 92 SE-R, 98 S14.
-
Turboman280
- Posts: 171
- Joined: Tue Jun 11, 2019 8:28 pm
- Location: Mesa
Re: Club T-Shirts
I was going to cut the sleeves off anyway.
Carl
1975 280Z restomod
Work in progress
1975 280Z restomod
Work in progress
Re: Club T-Shirts
Ordered and paid ($600) today for our T-shirts. Roughly 15 or so shirts were ordered for those previously expressing interest and their size preference. I will have 8-10 left for you late comers though specific sizes will be limited. I will see a proof by the middle of next week for my approval, with the full quantity delivered the first week in November. I will update you as I have more info.
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6