desertdatsuns.net

I have a 1988 Nissan Pulsar NX SE project that I got years ago and unfortunately was never able to finish.
I'm moving out of state and already am bringing 3 cars along so I can't bring this one. It's a pretty rare car with an even more rare engine option, and I really don't want to send it to the scrapyard so I thought I'd see if anyone here wanted it first, I'd rather give it away to a good home than scrap it for a couple hundred dollars.

It's a Twin Cam SE model with a 1.8l CA18DE and a 5 speed manual. The engine and transaxle is outside of the car though as you can see. The engine had a blown head gasket so I took it out but never actually did it. It did run when I got the car albeit poorly. The hood is included and is back on the car currently, I just didn't have any pictures since I put it on.
The car would have to be towed from Mesa at approximately Gilbert and the 60, and the engine+transaxle would need to be picked up from my brothers house in Ahwatukee, near 44th st and Warner.

[image][/image]
[image][/image]
[image][/image]
[image][/image]
[image][/image]


Bonuses: I have a spare 5 speed transaxle for it, and a 1988 Pulsar NX factory service manual, as well as an extra T top panel for the left side as the original one has a dent.

The title is notarized and ready to go. Send me a reply or a PM if you're interested and I'll give you my phone number. It has to go this weekend as it's at my neighbors house and I'm moving literally today (Friday 7/22) and she was nice enough to let me keep it there but I don't want to push my luck by having it there for a week. She will only be able to hand over the title and can't help with loading the car.
If you don't have a tow rig you can rent a u-haul and a car hauler for pretty cheap to get it to where you need to.
If you're using a pickup truck you'd need to bring either an engine crane to my brothers or a few guys to load the engine and transmission (and the spare trans). They're together as one unit. They are on a furniture dolly so you could roll it up a ramp on a u-haul but only the 15 ft trucks or bigger have a ramp FYI.

Let me know if you're interested!

So wish I had a place for this but I'm completely tapped out on space, and my neighbor's good will. I would hate to see this scrapped because there's so much potential. You just don't see these anymore... and with a stick no less! Any room at Datsun Ranch, Greg?

I'm in. Ring me if you have a sec, 602-828-8908. I can roll by tomorrow, early in the day.

Truck, trailer, hoist at the ready.

-Greg

Fantastic! Sorry I didn't see your message till now, it's 11 pm so I'll call you in the morning. So glad it's not going to the scrapper! Thanks!

glad it will be saved