The Adventure Begins- My 620 build thread

320 through 720
Post Reply
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

The engine is on the way to being back together. Also prepped the grille and radiator for paint, repaired the back-up light wiring and removed about 30lbs. of owner installed junk from under the truck.
Attachments
IMG_8479.jpg
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

Refinished the grille today, masking off the bright headlight surrounds and rattle canning it with semi-gloss black. Just set the grille in place for a picture, then took it back out to provide access to my continuing engine work. Now onto the radiator. On a side note, the bolt I thought had dropped down where the timing chain is, was found today when I pulled the crank pulley. It had fallen and wedged itself between the pulley and the timing chain cover. Finding that bolt avoided a ton of extra work.
Attachments
IMG_8480.jpg
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

My Datsun wheel centers came yesterday from Etsy and they fit perfectly, and now look like legitimate Datsun/Nissan wheels. Also installed the new water-pump yesterday.
Attachments
IMG_8484.jpg
IMG_8483.jpg
IMG_8482.jpg
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
L320-Dale
Posts: 342
Joined: Thu May 23, 2019 6:25 pm
Location: North Gilbert

Re: The Adventure Begins- My 620 build thread

Post by L320-Dale »

Looking good, you're making nice progress.

Dale
Dale - Gilbert, Az
1965 L320 - Bamboo Tan / 1972 1200 - Sun-light Blue / 1970 240Z - Silver
User avatar
Duffman
Posts: 169
Joined: Sat May 25, 2019 10:52 am
Location: Scottsdale, AZ

Re: The Adventure Begins- My 620 build thread

Post by Duffman »

Nice, Randy!
Duffman
1970 240Z, #1399
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

Got a few more things cleaned up and hung back on the engine today (distributor and oil pump). Also sprayed the radiator black today (ran out of paint today for second coat) and put my freshly painted kick panels with speaker grills back in the interior. Continuing to remove extraneous wiring in the engine compartment and under the dash for all kinds of aftermarket crap.
Attachments
IMG_8489.jpg
IMG_8487.jpg
IMG_8491.jpg
IMG_8486.jpg
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Rob1972
Posts: 48
Joined: Thu May 06, 2021 3:36 pm
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Rob1972 »

I've brought myself up to date on your little gem. I love those 70's Datsuns. I had a '72 510 wagon. Maybe I missed it but what tire size did you decide on?
Robin

'72 240Z original L24 and SU's, 5-speed, 4.11 gears
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

225-50-17 tires. In hindsight, after seeing them on the truck, I should have gone wider on the rears (245). A 510 wagon was also on my shopping list before buying the 620.
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

Not too much to report today. I did test fit my alternator and discovered I need a new belt because the new water pump pulley is slightly larger. I also cut the exhaust pipe below the header, so I could remove it for re-painting the block and re-finishing the header. Both the front parking light lenses were busted up so I ordered a pair off eBay today.
Attachments
IMG_8493.jpg
IMG_8492.jpg
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
Randalla
Posts: 937
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: The Adventure Begins- My 620 build thread

Post by Randalla »

Prepped and painted the header with VHT paint and got the alternator mounted with the proper belt and bracket. Also bought a couple rattle cans of Datsun engine block blue paint. Just a bit more cleaning on the block and she'll be ready for paint.
Attachments
IMG_8498.jpg
IMG_8497.jpg
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Post Reply