My 66 520 Resto Mod

320 through 720
Post Reply
User avatar
Charlie69
Posts: 32
Joined: Thu May 30, 2019 12:15 am

My 66 520 Resto Mod

Post by Charlie69 »

Here is how it was when I purchased it about 10 years ago.

Image

Image

Image

Image

Image

Image

More later.
Last edited by Charlie69 on Thu Oct 17, 2019 5:48 am, edited 1 time in total.
Coyote Patrol
Posts: 10
Joined: Tue Oct 08, 2019 3:44 pm

Re: My 66 520 Resto Mod

Post by Coyote Patrol »

Nice truck there bud!
User avatar
Charlie69
Posts: 32
Joined: Thu May 30, 2019 12:15 am

Re: My 66 520 Resto Mod

Post by Charlie69 »

Thank you sir.

I hope to hit this build hard after I get my dailys engine swapped. The wiring is taking much longer than I had anticipated but that is OK as it will be a custom harness that started life as a 1980 720 L20b Automatic harness.

Here are afew pictures of some of the mods done to this truck in the last several years.

In California at the Wigwam Hotel for the SWDP barbecue.

Image

Image

The 720 heater and AC boxes and controls.

Image

Image

The custom firewall and tunnel.my brther bent up for me. I welded in the firewall and he did the tunnel. Just a small hole had to be cut to make the engine and trans fit like I wanted.

Image

Image

Image

Image

Image

Image

Image

Image

Shortened stock 620 automatic shifter with a 280Z shifter handle. I know th fad is long tall shifters but in this small cab space is limited.

Image

Radiator support mod.

Image

Image

Image

720 AC condensor mounted.

Image

Custom locking gas door.

Image

My brother and I did several mods to the stock 66 chassis but when it took 3.5 hours to set the engine and transin the truck with the cab on it was time to swap in the 1980 standard cab chassis I had sitting around. The 1980 chassis has the benefit of the removabIe transmission cross member, disk brakes, pitman arm and idler arm on the outside of the frame, and no king pins. I bought the 1980 720 truck when I was Working and living in Bagdad AZ as a mill mechanic for $50 with a title.

We also pushed the frame engine and transmission mounts back a half inch for the radiator and fan clearance.

Image

Image

There are many, many more mods done to this truck that to the untrained eye would miss.
dat521
Posts: 161
Joined: Sun May 26, 2019 11:53 pm
Location: laveen

Re: My 66 520 Resto Mod

Post by dat521 »

nice work
User avatar
Randalla
Posts: 930
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: My 66 520 Resto Mod

Post by Randalla »

Looking good Charlie. Now let's get that puppy on the road.
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
Charlie69
Posts: 32
Joined: Thu May 30, 2019 12:15 am

Re: My 66 520 Resto Mod

Post by Charlie69 »

My problem is I can't rush perfection! LOL
User avatar
Charlie69
Posts: 32
Joined: Thu May 30, 2019 12:15 am

Re: My 66 520 Resto Mod

Post by Charlie69 »

My problem is I can't rush perfection! LOL

I had some used tires mounted on a spare set of Isuzu wheels for test fit and rollers.

Image

Image

I might space the rears out a 1/2".
Vetteguy22
Posts: 118
Joined: Sat May 25, 2019 9:11 pm
Location: Prescott

Re: My 66 520 Resto Mod

Post by Vetteguy22 »

Nice work. Love the job on the firewall and trans tunnel.
Rob
User avatar
Charlie69
Posts: 32
Joined: Thu May 30, 2019 12:15 am

Re: My 66 520 Resto Mod

Post by Charlie69 »

Thank you Rob. My design and measurements and my brother's metal fab and installation. I can not weld more than spot welds.

I have done some little things to the 520. I will be hard on this truck as soon as I get the remanufactured Z20 in my 86 Daily driver.
Post Reply