280Z new to me

240Z through 300ZX Z31
User avatar
Randalla
Posts: 930
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

280Z new to me

Post by Randalla »

Dragged the 1975 280Z I bought last week to storage today. Thanks to Dale for all his help. It was very much appreciated! I will likely have an L-28 engine and miscellaneous other 280Z parts for for sale in the near future for anyone interested.
Attachments
IMG_4616.JPG
IMG_4608.JPG
IMG_4604.JPG
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Ryanotown22
Posts: 93
Joined: Sat May 25, 2019 8:26 pm

Re: 280Z new to me

Post by Ryanotown22 »

I think I saw that on offer up. What’s the interior look like?
Ryan
‘78 280z sold
‘75 280z
User avatar
Randalla
Posts: 930
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: 280Z new to me

Post by Randalla »

I was just over to where I now have the car stored today. Honestly, Until I get a chance to clean it up inside it's difficult to tell what's good and what's not. That will wait till it gets cooler. At least it's in a secure area now. Are you looking for something in particular?
Attachments
IMG_4630.JPG
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
L320-Dale
Posts: 340
Joined: Thu May 23, 2019 6:25 pm
Location: North Gilbert

Re: 280Z new to me

Post by L320-Dale »

Your welcome Randy. It was an easy one to get. Glad I could help.
Dale
Dale - Gilbert, Az
1965 L320 - Bamboo Tan / 1972 1200 - Sun-light Blue / 1970 240Z - Silver
User avatar
Randalla
Posts: 930
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: 280Z new to me

Post by Randalla »

Went over today and put 35 lbs. of pressure in each tire. It sits up a little perkier now :D
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
User avatar
L320-Dale
Posts: 340
Joined: Thu May 23, 2019 6:25 pm
Location: North Gilbert

Re: 280Z new to me

Post by L320-Dale »

Randalla wrote: Sun Aug 18, 2019 5:17 pm Went over today and put 35 lbs. of pressure in each tire. It sits up a little perkier now :D
I bet its easier to push now! :lol: Actually all it all, it went pretty easy getting it. ;)
Attachments
Randy 280z.jpg
Dale - Gilbert, Az
1965 L320 - Bamboo Tan / 1972 1200 - Sun-light Blue / 1970 240Z - Silver
Ryanotown22
Posts: 93
Joined: Sat May 25, 2019 8:26 pm

Re: 280Z new to me

Post by Ryanotown22 »

Nothing really I just like seeing before pictures :D
Ryan
‘78 280z sold
‘75 280z
User avatar
Randalla
Posts: 930
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: 280Z new to me

Post by Randalla »

This is the only interior picture I've shot so far Ryan. I did at least get rid of all the crap in the in the car. Still needs my shop vac.
Attachments
IMG_4618.JPG
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Ryanotown22
Posts: 93
Joined: Sat May 25, 2019 8:26 pm

Re: 280Z new to me

Post by Ryanotown22 »

Not as bad as a lot that I have seen lately
Ryan
‘78 280z sold
‘75 280z
User avatar
Randalla
Posts: 930
Joined: Fri May 24, 2019 8:58 am
Location: North Scottsdale

Re: 280Z new to me

Post by Randalla »

Went to storage yesterday to do some parts inventorying and shot a few more pictures of my 1975 280Z. Driver's door and fender are probably beyond repair and the front sub-frame rails are crushed (but not rusty) but otherwise the car looks to be a decent builder.
Attachments
IMG_5098.JPG
IMG_5084.JPG
IMG_5085.JPG
IMG_5095.JPG
1967 1/2 Roadster- 1600 4 cyl.
1972 240Z- 280 I-6
1976 710 Wagon- L20B 4 cyl.
1977 620 King Cab - L18 4 cyl.
2003 350Z Track- VQ V-6
Post Reply