choke lever bracket

240Z through 300ZX Z31
Post Reply
qz16
Posts: 5
Joined: Fri May 31, 2019 3:47 pm

choke lever bracket

Post by qz16 »

Its been a while since I have posted on this site. Hope everyone is doing well.

I have been trying to fab a choke cable lever bracket with no success. This is the bracket that mounts under the center console. There is a single slot in my console. There are different brackets, series one does not fit my setup. As I understand it a 1972 – 1973 240z or a 260z choke lever bracket will work. I know this from experience as I have already bought a series one before I found out it would not fit. I would like to either: borrow a bracket so that I can copy it, or buy a bracket at a reasonable price. As always thanks in advance for your assistance.

Regards,

q
User avatar
insitu_az
Site Admin
Posts: 213
Joined: Wed May 22, 2019 7:12 pm
Location: East Mesa

Re: choke lever bracket

Post by insitu_az »

Have you looked at the one from Z Car Depot? Maybe it will work for you.

https://zcardepot.com/products/choke-le ... ement-240z


Z-car-bracket.jpg
qz16
Posts: 5
Joined: Fri May 31, 2019 3:47 pm

Re: choke lever bracket

Post by qz16 »

I have this bracket but need the lever and bracket that attaches to the zcardepot bracket. Thanks anyway
.
User avatar
insitu_az
Site Admin
Posts: 213
Joined: Wed May 22, 2019 7:12 pm
Location: East Mesa

Re: choke lever bracket

Post by insitu_az »

Ok. I have bought a couple things from Zedd saver. They stock a lever, but its the early one that had both throttle and choke.

https://www.zeddsaver.com/collections/c ... ttle-lever

Also, New-Datsun-Parts has a complete assembly as used in the 260Z. It is a bit pricey, but most of their stuff is NOS.

http://www.new-datsun-parts.com/datsun- ... rior2.html
zina29.jpg
User avatar
Racerx3110
Posts: 107
Joined: Mon May 27, 2019 9:34 pm

Re: choke lever bracket

Post by Racerx3110 »

try Cody in tsn 601-721-2078, he has/had a number of parts cars
1977 280z RB25det Neo
qz16
Posts: 5
Joined: Fri May 31, 2019 3:47 pm

Re: choke lever bracket

Post by qz16 »

Thanks for all the responses. I found a complete assembly at a reasonable price.
Once again, I appreciate all your efforts.
Post Reply